Page 1
Part Number: H001SAJ200 Description: Outback Mobile Internet Installation Instructions Note: This product is not compatible with Remote Engine Starter Accessory. 1. Kit Contents Item Description Qty. 12V adapter plug, RA,13” L Well Nut, Rubber, M5 Harness hold-down clip Screw, SS, Phillips, M5, 20mm L Foam tape, 1”...
Page 2
(Please note bottom dock must clear the rear cargo tray.) 3. Using the provided four rubber well nuts, push nuts into all four holes until seated against the quarter panel interior trim. PN: H001SAJ200 REV. - 3/10/10 SUBARU OF AMERICA...
Page 3
Make sure adapter is completely seated into the socket. 6. Insert and attach the inline connector. Wrap the urethane tape around the dock connector as shown, allowing for removal of the mating connector, if necessary. PN: H001SAJ200 REV. - 3/10/10 SUBARU OF AMERICA...
Page 4
8. Wipe down area with alcohol wipe and place harness cable clip in area as shown. Then insert cable into clip to hold against inner wall. 9. When installation is complete, unit assembly should look as shown. PN: H001SAJ200 REV. - 3/10/10 SUBARU OF AMERICA...
Page 5
11. After launching an internet browser (Explorer, Firefox, etc.) with a laptop, PC or other WiFi enabled device, you should be able to view the Subaru login screen. Click on the login screen and it will redirect you to your default browser page.
Page 6
PN: H001SAJ200 REV. - 3/10/10 SUBARU OF AMERICA...