Timer Mode - Python 571XP Owner's Manual

➜

timer mode

By pressing the remote
lights will flash 4 times and then start the vehicle and run for the
set duration. The remote start can be shut off by the 2-way
remote by pressing the remote start button
remain in timer mode, but if any other shut down zones or the
ignition become active the timer mode will cancel.
1. Press Timer mode buttons.
2. The vehicle will confirm with 4 parking light flashes.
3. After a 1-second delay the vehicle will start.
4. The system will start the car and will run for the specified dura-
tion, unless shut down by the remote start button
5. The system will start every 3 hours (for a maximum of 6
starts) until canceled by the brake, hood, or neutral safety
shut-down wires.
On entering Timer Mode the remote will respond with the Start
On notification. The remote will respond with the Start and Stop
notification during each Start and Stop of the Vehicle while in
Timer mode.
important! !
open areas. Never start and run the vehicle in an
enclosed space such as a garage or carport.
To exit timer mode, turn the ignition switch on any time the
engine is running. The parking lights will flash 4 times, indicat-
ing timer mode has been exited.
22
and
Timer Mode should be used only in
© 2005 directed electronics—all rights reser ved
buttons the parking
twice and
.