Table of Contents
Advertisement
timer mode
By pressing the remote
and run for the set duration. The remote start can be shut off by the transmitter by pressing the remote start
button
and remain in timer mode, but if any other shut down zones or the ignition becomes active the
timer mode will cancel.
1. Press Timer mode buttons.
2. The vehicle will confirm with 4 parking light flashes.
3. A 1-second delay will start.
4. The system will start the car and will run for the specified duration, unless shut down by the remote start
button
. If shut down with the remote start button
5. The system will start every 3 hours until canceled by the brake, hood, or neutral safety shut-down wires.
To exit timer mode, turn the ignition switch on any time the engine is running. The parking lights will flash 4
times, indicating timer mode has been exited.
6. The system will start every 3 hours until canceled by the brake, hood, or neutral safety shut-down wires.
valet mode
To enter or exit Valet Mode with the Valet/Program switch:
1.
Turn the ignition on and then off.
2.
Within 10 seconds, press and release the Valet/Program switch.
The status LED will light solid if you have entered Valet Mode, and will go out if you have exited Valet Mode.
© 2006 Directed Electronics—all rights reserved
and
buttons the parking lights will flash 4 times and then start the vehicle
the system will remain in timer mode.
43
Advertisement
Table of Contents
