Table of Contents
Advertisement
Deciding How to Connect DVD-VCR
GB
You must take into account various factors when connecting audio or video systems:
Types of connectors available on your systems
Systems connected permanently to the DVD-VCR (satellite receiver for example) or temporarily
(camcorder for example)
Your DVD-VCR is equipped with the following connectors.
Connector
Location
Type
MIC JACK
Front
MIC JACK
MIC 1
MIC 2
LINE
Rear
Audio/Video RCA
Audio output
Rear
Audio RCA
COMPONENT Rear
RCA
output
Digital AUDIO Rear
Coaxial
output
DIGITAL
AUDIO OUT
S-VIDEO
Rear
S-JACK
output
Whenever you connect an audio or video system to your DVD-VCR, ensure that all elements are
switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions and
associated safety precautions.
10
Direction
Recommended Use
In
MIC
In/Out
Television
Other VCR
Out
Audio out (DVD only)
Out
COMPONENT out (DVD only)
Out
Digital Audio out (DVD only)
Out
S-Video out (DVD only)
Connecting DVD-VCR to the TV using the RCA Cable
TV
3
You can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available on
the television. You thus:
Obtain better quality sound and pictures
Simplify the setting up procedure of your DVD-VCR
Make sure that both the television and the DVD-VCR are switched off before connecting the cables.
1
Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear of
the DVD-VCR.
2
Plug the other end into the appropriate connector on the television.
GB
2
11
Advertisement
Table of Contents
