Using The Lcd Keyboard; Setting Up An Ip Address - Kodak ESP 1.2 Extended User Manual

Networking Your Printer

Using the LCD keyboard

Setting up an IP Address

10
When you need to enter letters or numbers, a keyboard appears on the LCD.
IMPORTANT: You should only need to set up an IP Address for your printer if you are
having a problem with connecting to your network. Typically, it is not
necessary to set up an IP Address. This procedure is for advanced users who
know how to obtain the IP Address for the printer.
To set up your IP Address on the printer:
1. Press .
2. Press to select Network Settings, then press OK.
3. Press to select Advanced IP Address Setup, then press OK.
4. Press OK again to continue.
5. Select one of the following, then press OK:
• Dynamic (DHCP)
• Manual (Static)
6. If you selected Manual (Static), you are prompted to enter an IP Address, a
Subnet Mask, a Gateway Address, and a DNS Server address. Press OK after
each entry. Use the navigation buttons to enter each digit.
Consult your Internet service provider or network administrator for more
information.
www.kodak.com/go/aiosupport
On the control panel, press
letters and numbers, using the correct uppercase and
lowercase letters. Press OK after each character. When you
are done, select DONE, then press OK.
, , or to select the