Washing Clothes Manually; Using Delay Start - Samsung WF-R106NS User Manual

washing a load of laundry

WaShINg CLotheS maNuaLLy

You can wash clothes manually without using the Fuzzy Logic feature.
To do so:
1. Turn the water supply on.
. Turn the Fuzzy Control dial to "Standard" or "Pre-Wash
. Open the door.
. Load the articles one at a time loosely into the drum, without overfilling.
. Close the door.
. Put the detergent and, if necessary, softener or prewash detergent, in the appropriate
compartments.
. Press the Temperature button to select the temperature.
(cold water, 30˚C, 40˚C, 60˚C, 95˚C)
. Press to rinse button to select the required number of rinse cycles.
Maximum number of rinse cycles is six.
The washing duration will be prolonged accordingly.
. Press the Spin button to select the spin speed.
The rinse hold program allows you to take clothes that are dripping wet out of the washing
machine.
: No Spin
10. Press the button repeatedly to cycle through the available delayed start options (from 3 hours
to 19 hours in one hour increments). Displayed hours means the time of finished washing-
cycle.
11. Press the Start/Pause button and the machine will begin the cycle.

uSINg DeLay StaRt

You can set the washing machine to finish your wash automatically at a later time, choosing from 3 to 19
hours delay (in 1 hour increments). Displayed hours means the time of finished washing-cycle.
To do this:
1. Manually or automatically set your washing machine for the type of clothes you are washing.
. Press the delay button repeatedly until the delay time is set.
. Press the start/pause button. The Delay Start indicator (
begin counting down until it reaches your finish time.
. To cancel Delay Start, press the Delay button repeatedly until Delay Start light is turned off ,
or turn the washing machine off. (you can also turn the washing machine off to cancel Delay
Start.)
1_ Washingaloadoflaundry
: Rinse hold
"
+
)will light, and the clock will