Connect The Camera To The Computer - Polaroid DMC 1e Installation Manual

4 Connect the Camera to the Computer

The DMC Ie camera requires a SCSI host adapter in your
computer. If your computer does not have an adapter, you must
install one (see page 11). If your computer is a PC-compatible with
a SCSI adapter, but the adapter is connected to a hard drive or CD-
ROM drive, installing a second adapter is recommended.
Set the camera SCSI address:
Each device connected to a SCSI host adapter must have a unique
address from 0-6. To assure a unique address for the camera,
determine the addresses of any other SCSI devices:
Power Mac or PowerPC
• Run Apple System Profiler,
usually on the Apple menu.
If it is not, it may be avail-
able from www.apple.com/
swupdates.
• Click Devices and Volumes
to view the SCSI device
addresses.
Windows 95, 98 or NT
• Look at the SCSI
address switch on each
SCSI device connected
to your system. If nec-
essary, see the instruc-
tions provided with the
devices.
Turn the camera power switch to off (0) and set the SCSI address
switch to a value not used by any other device.
The address is preset to 4. Do not change it unless another
Note:
device is using 4. Other addresses typically available are 2, 5 and 6.
6
English
Power switch?
(off=0)
SCSI address switch
Do not use 7, 8 or 9?
(not valid addresses)