Sleep Timer Setting - Philips FW-C870 User Manual

2
Press CD, TUNER or TAPE to select the
desired source.
Make sure the music source has been prepared.
CD – Load the disc(s). To start from a specific
track, make a programme (refer to "CD
Operation - Programming the disc tracks").
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 2.
3
Press à or á on the system repeatedly to set
the hour for the timer to start.
4
Press í or ë on the system repeatedly to set
the minute for the timer to start.
5
Press CLOCK/TIMER to store the start time.
The timer is now set and activated.
will remain on the display.
TIMER
At the preset time, the selected source will play.
To exit without storing the setting
Press Çon the system.
Notes:
– If the selected source (CD) is not available when
preset timer is reached, TUNER will be selected
automatically.
– If the source selected is TAPE, and if the preset
time is reached during dubbing, TUNER will be
selected automatically.
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.
To deactivate the TIMER
Press TIMER ON/OFF on the remote control.
The display will show "CANCEL" and
will disappear from the display.
To activate the TIMER
Press TIMER ON/OFF on the remote control.
The last set timer information will be shown
for a few seconds and
display.
pg 001-028/C870/21-Eng
TIMER
will appear on the
TIMER
25
Clock/Timer

Sleep Timer Setting

The sleep timer enables the system to switch to
Standby mode automatically at a preset time.
1
Set the clock (refer to "Clock Setting").
2
Press SLEEP on the remote control repeatedly
to select a preset time.
The selections are as follows (time in
minutes):
60 ™ 45 ™ 30 ™ 15 ™ OFF ™ 60 ...
"SLEEP XX" or "OFF" will be displayed. "XX"
is the time in minutes.
3
When you reach the desired length of time, stop
pressing the SLEEP button.
The Sleep Timer is now set. After this
amount of time passes, the system will switch to
Standby mode.
To deactivate the Sleep Timer
Press SLEEP repeatedly until "OFF" is displayed,
or press the STANDBY ON button.
6/8/01, 8:33 AM
25
3139 115 20404