Tuning To Preset Radio Stations; Changing Tuning Grid; Karaoke; Microphone Mixing - Philips FW-C870 User Manual

Radio Reception
Notes:
– If you attempt to store more than 40 preset
radio stations, "PROGRAM FULL" will be
displayed.
– During programming, if no button is pressed
within 20 seconds, the system will exit the
Programme mode automatically.

Tuning to Preset Radio Stations

Press í or ë (or Digits 0–9 on the remote
control) to select the desired preset number.
The preset number, radio frequency, and
waveband will appear on the display.
For Recording, please refer to "Tape
Operation/Recording".

Karaoke

Microphone Mixing

Connect a microphone (not supplied) to the
system allowing you to sing along with the music
source.
1
Connect a microphone to the MIC jack.
Before connecting the microphone, set the MIC
LEVEL to the minimum level to prevent
howling sound.
20
pg 001-028/C870/21-Eng
1
2
2
3
MIC LEVEL
4
20

Changing Tuning Grid

all versions)
In North and South America, the frequency step
between adjacent channels in the MW band is
10 kHz (9 kHz in some areas). The preset
frequency step in the factory is 9 kHz.
Changing the tuning grid will erase all
previously stored preset radio stations.
Disconnect the system from the AC power
supply (pull out the AC power cord).
While holding down TUNER and á on the
system, reconnect the system to the AC power
supply.
The display will show "GRID 9" or "GRID
10".
Notes:
– GRID 9 and GRID 10 indicate that the tuning
grid is in step of 9 kHz and 10 kHz respectively.
– The FM tuning grid also will be changed from
50 kHz to 100 kHz or vice versa.
Press CD, TUNER, TAPE or AUX to select
the source to be mixed and start playback.
Adjust the volume level of the source with
VOLUME control.
Adjust the microphone volume with MIC
LEVEL control.
Note:
– Keep the microphone away from the speakers to
prevent howling.
For Recording, please refer to "Tape
Operation/Recording".
6/8/01, 8:32 AM
(not available for
3139 115 20404