Deactivating The Timer; Activating The Timer; Sleep Timer Setting - Philips MZ-9 User Manual

Clock/Timer
1
Press and hold CLOCK/TIMER for more than
two seconds to select timer mode.
"00:00" or the last timer setting starts
flashing.
starts flashing.
TIMER
The selected source will be lighted while
other available sources are flashing.
2
Press 3 CDC, TUNER or TAPE to select the
desired source.
Before setting timer, make sure the music source
has been prepared.
3 CDC – Load the disc(s). To start from a
specific track, make a programme (refer to "CD
Operation - Programming the disc tracks").
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 2.
Press S or T repeatedly to set the hour
3
and minutes for the timer to start..
Press PRESET to toggle between hour and
minutes.
4
Press CLOCK/TIMER to store the start time.
remains on the display.
TIMER
At the preset time, the selected source will play.
To exit without storing the setting
Press STOP on the system.
Notes:
– When the preset time is reached and the
selected disc tray is empty, the next available disc
will be selected. If all the disc trays are not
available, Tuner will be selected automatically.
– If the selected source is TAPE, and if the preset
time is reached while high speed dubbing in
progress, Tuner will be selected automatically.
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.
26
pg 001-030_MZ9_22-Eng 26

Deactivating the timer

1
Press and hold CLOCK/TIMER (TIMER) for
more than two seconds.
2
Press STOP on the system to cancel the timer.
"OFF" is displayed and the
Activating the timer (for the same preset
time and source)
1
Press and hold CLOCK/TIMER (TIMER) for
more than two seconds.
2
Press CLOCK/TIMER again to store.
is shown.
TIMER

Sleep timer setting

The sleep timer enables the system to switch to
standby mode automatically at a preset time.
1
Press SLEEP on the remote control repeatedly
to select a preset time.
The selections are as follows (time in
minutes):
60 ™ 45 ™ 30 ™ 15 ™ OFF ™ 60 ...
"SLEEP XX" or "OFF" is displayed. "XX" is
the time in minutes.
2
When you reach the desired length of time, stop
pressing the SLEEP button.
is shown, except for "OFF" mode.
SLEEP
The sleep timer is now set. Before the system
switches to standby mode, a countdown of 10
seconds is displayed.
"SLEEP 10" ™ "SLEEP 9".... ™
"SLEEP 1" ™ "SLEEP"
To deactivate the sleep timer
Press SLEEP repeatedly until "OFF" is
displayed, or press the STANDBY ON button.
1/23/02, 1:59 PM
disappears.
TIMER
3139 115 21511