Samsung MD40B User Manual page 198

Appendix
Powering Off, Screen Saver and Power Saving Mode

Power off the product for 2 hours after using it for 12 hours.

Go to Display Properties > Power Supply on your PC and set the product to power off as

required.
Using a screen saver is recommended.

It is best to use a single-color or moving-image screen saver.
Regular Color Change

Type 1
FLIGHT TIME
OZ348 20:30
UA102 21:10
Use 2 colors
Switch between 2 colors every 30 minutes as shown above.
Avoid combinations of a text color and background color of contrasting brightness.

Avoid using grey as it may contribute to afterimage burn-in.
Avoid using colors of contrasting brightness (black and white; grey).
:
FLIGHT TIME
:
OZ348
20:30
Regular Text Color Change

Use bright colors of similar brightness.

Interval: Change text color and background color every 30 minutes
:
FLIGHT TIME
:
OZ348 20:30
Move and change text every 30 minutes as shown below.

:
FLIGHT TIME
:
OZ348 20:30
[ Step 1 ]
Regularly display a moving image along with a logo.

Interval: Display a moving image along with a logo for 60 seconds after using for 4 hours.
The best way to protect the product from afterimage burn-in is switching the power off or

setting the PC or system to run a screen saver when not in use. Also, Warranty service may be
limited depending on instruction guide.
FLIGHT
OZ348
UA102
:
FLIGHT TIME
:
OZ348
20:30
:
FLIGHT TIME
FLIGHT
: OZ348
OZ348 20:30
[ Step 2 ]
Type 2
TIME
20:30
21:10
:
: FLIGHT
TIME
: :
20:30 OZ348
:
FLIGHT TIME
:
OZ348 20:30
[ Step 3 ]
Appendix
TIME
20:30
198