Speaker Settings; Reset Sound - Samsung MD40B User Manual

5
Sound Adjustment
5.3

Speaker Settings

m
MENU
Speaker Select (External

If you are listening to the sound track of a broadcast or movie through an external receiver, you may
hear a sound echo caused by the difference in decoding speed between the product speakers and
the speakers attached to your audio receiver. If this occurs, set the product to External.


Auto Volume (Off

Normal equalizes the volume level on each channel, so that when you change channels, the volume
level is the same.
Night equalizes and decrease the volume level on each channel, so each channel is quieter.
useful at night, when you may want to keep the volume low.
To use the volume control of a connected source device, set
volume control of the connected source device may not be applied if
Normal
5.4

Reset Sound

m
MENU
Reset all sound settings to the factory defaults. Select
the pop-up, and then press ENTER[
Sound Speaker Settings
/ Internal)
When you set Speaker Select
sound through the external speakers only. When the
the product speakers and the external speakers are on. You will hear sound through both.
If there is no video signal, both the product speakers and the external speakers will be mute.
/ Normal / Night)
or Night.
Sound Reset Sound
] again.
ENTER
to External, the product speakers are turned off. You will hear
Speaker Select
Auto Volume
ENTER
Reset Sound, press ENTER[
is set to Internal, both
Night
to Off. A change to the
Auto Volume is set to
], select Yes in
111
5 Sound Adjustment
is