Divx® Video On Demand; Network Remote Control - Samsung MD40B User Manual

8
System
Problem
The message "Connecting to
Anynet+ device..." appears on
the screen.
The connected device is not
displayed.
8.13 DivX® Video On Demand
m
MENU
Shows the registration code authorized for the product. If you connect to the DivX web site and register
using that code, you can download the VOD registration file.
For more information about DivX® VOD, visit "http://vod.divx.com".

8.14 Network Remote Control

m
MENU
Turn on/off or give permission to Samsung mobile phone devices to connect with and control the
product.
You must have a Samsung Mobile phone/device which supports Wireless Remote Control. For more
details, refer to each device's manual.
You cannot use the remote control when you are configuring

Anynet+ or switching to a view mode.
Use the remote control after the product has completed Anynet+

configuration or has finished switching to Anynet+.
Check whether or not the device supports Anynet+ functions.

Check whether or not the HDMI cable is properly connected.

Check whether

setup menu.
Search Anynet+ devices again.

Anynet+ requires an HDMI connection. Some HDMI cables may

not support Anynet+ functions.
If the connection is terminated because there has been a power

failure or the HDMI cable has been disconnected, please repeat
the device scan.
System DivX® Video On Demand
System Network Remote Control
Possible Solution
Anynet+ (HDMI-CEC) is set to
ENTER
ENTER
On in the Anynet+
151
8 System