Receiver - Samsung MD40B User Manual

8
System

8.12.3 Receiver

You can listen to sound through a
To listen to sound through a receiver, go to
Receiver). Then select
If your Receiver
Troubleshooting for Anynet+
Problem
Anynet+ does not work.
I want to start Anynet+.
I want to exit Anynet+.
Receiver (i.e. Home Theater) instead of the product Speaker.
Receiver
Receiver and set to On.
supports audio only, it may not appear in the device list.
Check if the device is an Anynet+ device. The Anynet+ system

supports Anynet+ devices only.
You can connect only one receiver (home theater).

Check if the Anynet+ device power cord is properly connected.

Check the Anynet+ device's Video/Audio/HDMI cable

connections.
Check whether

setup menu.
Check whether the remote control is Anynet+ compatible.

If you have removed and then reconnected the HDMI cable,

please make sure to search devices again or turn your product off
and on again.
Check if the Anynet+ function of the Anynet device is set on.

Check if the Anynet+ device is properly connected to the product

and check if the
Anynet+ Setup menu.
Press the TOOLS

a menu you want.
Select View PC

Press the SOURCE

select a non- Anynet+ device.
screen (System Anynet+ (HDMI-CEC)
Possible Solution
Anynet+ (HDMI-CEC) is set to
Anynet+ (HDMI-CEC) is set to
button to display the Anynet+ menu and select
in the Anynet+ menu.
button on the product remote control and
On in the Anynet+
On in the
150
8 System