Table of Contents
Advertisement
Disassembly and Assembly Instructions
9
Install PBA ASSY
1) Install PBA ASSY and Connect LCD Connector.
(Be careful about scratch and damage)
11
Install INTENNA
1) Install intenna into REAR CASE.
(Be careful about scratch and damage)
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
10
Put up SIDE KEY
1) Put up two Side Key.
(Be careful about scratch and damage)
12
Construct REAR CASE
Construct two upper
Hook first.
1) Construct two upper Hook.
2) Construct left and right Hook.
3) Construct two lower Hook. Check the gap
between REAR and Front Case.
(Be careful about scratch and damage)
11-6
Advertisement
Table of Contents
