Table of Contents
Advertisement
Disassembly and Assembly Instructions
5
1) Remove Shield Can
1) Disassemble screws at the two point.
2) When removing Main Shield can, do not
destroy Main label.
3) Remove RF Shield Can in Main Shield Can.
(Be careful about scratch and damage)
7
1) Remove Front
1) Disassemble SCREW CAP at two point.
(Be careful about scratch and damage)
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
6
1) Remove Front Case
Be careful
not to break
Metal
Contact.
1) Push the holder by using driver and
disassemble Upper and Front Case.
(Be careful not to break Metal Contact.)
8
1) Disassemble UPPER and LOWER
1) Disassemble Right Hook as you can see on the
Picture.
2) Disassemble left Hook as you can see on the
Picture.
(Be careful about scratch and damage)
11-2
Advertisement
Table of Contents
