Connecting The Fm Antenna - Samsung HT-E330 User Manual

Connections
P.SCAN(PROGRESSIVE SCAN) FUNCTION
Unlike regular Interlace Scan, in which two fi elds of picture information alternate to create the entire picture
(odd scan lines, then even scan lines), Progressive Scan uses one fi eld of information (all lines displayed in
one pass) to create a clear and detailed picture without visible scan lines.
1. Press STOP button.
•
If playing a disc, press the STOP button twice so that "STOP", appears on the display.
2. Press and hold P.SCAN button on the remote control for over 5 seconds.
•
Pressing and holding the button for over 5 seconds will select "P.SCAN" and
"I.SCAN" alternately.
•
When you select P.SCAN, "P.SCAN" will appear on the display.
•
To set P.Scan mode for DivX discs, press the P.SCAN button on the remote
control for more than 5 seconds with no disc in the unit ("NO DISC" on the display), then load the
DivX disc and play.
COMPONENT OUT COMPONENT OUT
AUX IN AUX IN
L L
N N
1. Connect the FM antenna supplied to the FM Antenna jack.
2. Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it to a
wall or other rigid surface.
✎
NOTE

This product does not receive AM broadcasts.
14
English
HT-D330-XY_ENG-1228.indd 14 HT-D330-XY_ENG-1228.indd 14

Connecting the FM Antenna

FM Antenna (supplied)
FM ANT
VIDEO OUT VIDEO OUT
2011-12-28 2011-12-28 1:10:28 1:10:28