Connecting External Components; Connecting The Fm Antenna; Cooling Fan - Samsung HT-Q100 Instruction Manual

Hide thumbs Also See for HT-Q100:

Table of Contents

Connecting External C omponents

Example: Digital signal components such as a Set-Top Box or CD Recorder.

Analog signal components such as a VCR.

Connecting theFMAntenna

[

Optical Cable

(not supplied)

Audio Cable

(not supplied)

If the external analog compo-

nent has only one Audio Out

connect either left or right.

1 Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.

Connect AUX (Audio) In on the HomeTheater to Audio Out on the external analog compo-

nent.

• Be sure to match connector colors.

Press AUX on the remote control to select 'D.IN/AUX' input.

• Each time the button is pressed, the selection changes as follows: D,LX -* AUX

• You can also use the FUNCTION button on the main unit.

The mode switches as follows: DVD -* D,]i'4 -* AI_TX-_ USB -* FM

• You can connect the Video Output jack on your VCR to the TV, and connect the Audio

Output jacks on the VCR to this product.

COAXIAL

FM Antenna (supplied)

,..

1 Connect the FM antenna supplied to the FM 750 COAXIAL terminal.

2 Slowly move the antenna wire around until you find a location where reception is good, then fas-

ten it to a watt or other rigid surface.

cooling Fan

The cooling fan suppliescool air to the unit to preventoverheating.

Please observe the following cautions for your safety.

• Makesurethe unit is well-ventitated. I tthe unithas poorventilation,the temperature insidethe unitcould rise

and maydamageit

• Do not obstructthe coolingtan or ventilationholes (It the coolingtan or ventilationholes arecoveredwith a

newspaper or cloth,heat maybuild upinsidethe unit andfire may result)

" This unit does not receive AM broadcasts.

Table of Contents