Table of Contents
Advertisement
Exploded View/Disassembly&Assembly Instructions
17
1) Insert the KeyPad From lower part.
1) Insert KeyPad according to the Front standard rib.
19
1) Insert Con To Con to the Shield Can
Hole before assembling the Shield Can.
1) Be Careful not to get damage of Con To Con
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
18
1) Insert the Shield Can From
lower part.
2) Insert right side volume key first.
1) Confirm first whether volume and camera key has
attached.
2) Be careful not to get a damage of Case.
20
1) Tighten two Points of Screw
on Shield Can.
1) Be careful not to get a damage of Shield Can.
2) SCREW TORQUE : 0.7~ 0.9 kgf.cm
5-14
Advertisement
Table of Contents
