Table of Contents
Advertisement
9
1) Attach Rubber like picture.
1) Attach rubber so that it may not be projected to
outer block of PCB.
11
1) During Solder speaker and vibrator,
concern about polarity.
1) If some dust are covered on LCD, it should be
removed by alcohol.
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
Exploded View/Disassembly&Assembly Instructions
10
1) Attach Sponge like picture.
1) Take care so that Sponge may not infringe to the
Sub LCD and rubber.
1) paint a little of adhesive on
soldering parts.
1) Be careful not to get a damage of cases.
5-11
Advertisement
Table of Contents
