Table of Contents
Advertisement
5
1) Disjoint KEY Connector and Con
To Con Connector by a Pincette.
1) Be Careful not to get a damage of FPCB.
7
1)Disjoint a PBA in Front by
lifting up from down.
1) Be Careful not to get damage of Connector
2) Be Careful not to get a damage around Cases
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
Exploded View/Disassembly&Assembly Instructions
6
1) Remove two points of screw
which is used to fix a PCB.
1) Be Careful not to get a damage of PCB.
8
1) Remove black insulation TAPE that
is attached to Shield Can by a Pincette.
1) Be Careful not to get damage of Con To Con.
5-5
Advertisement
Table of Contents
