Samsung SGH-E690 Service Manual page 22

― Assembly
1
1) clean dust on the ground pad by alcohol.
1) Be careful not to be covered any dust on LCD
3
1) Attach electric conduction Tape on the
LCD's left, right,upper sides like picture.
1) Press electric conduction Tape again so that
TAPE may not get loose.
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
Exploded View/Disassembly&Assembly Instructions
2
1)Attach electric conduction Tapes on the
LCD's left, right,upper sides like picture.
1) Take care so that electric conduction Tape may
not attach outside silk.
4
1) Remove Tape after attaching two faces
Tape for fixing under ZIP Connector.
1) Attach two faces Tape according to silk.
5-9