Table of Contents
Advertisement
When Network is selected:
Select a printer or print queue icon from the network list by following the procedure described below.
For SMB environemnt
From the network list, search and select the printer. The printer will be displayed as
"host-name-p" and will be under the host name icon. The factory setting for the
workgroup name and host name is "Workgroup" and "FXnnnnnn" (nnnnnn: lower six
digits of the Ethernet address of the printer) respectively.
When you do not know the workgroup name and host name of the printer, either check with the
network administrator, or print out the Printer Settings to confirm. Refer to "3.10.1 " on how to
print the Printer Settings.
Click OK.
NetWare environment
From the network list, search and select the printer. The print queue is displayed under
the NetWare file server icon.
When you do not know the print queue name, check with your network administrator.
Click OK.
9
Confirm that the port name specified in Step 8 for the output destination
is shown in the Port list box of the Printer Driver Installation dialog box.
Then click Start to install.
The installation of printer driver begins.
2.2 (Windows 95/Windows 98/Windows Me)
2
25
Advertisement
Table of Contents
