Using Emulation; About Emulation; Emulation Mode; Host Interfaces And Emulation - Xerox DocuPrint C3055 DX Settings Manual

Pcl emulation setting guide
Hide thumbs Also See for DocuPrint C3055 DX:
Table of Contents

Advertisement

1

Using Emulation

1.1

About Emulation

This chapter explains the PCL emulation of the printer.
Print data is data written based on certain rules (grammars). These rules (grammars) are
called "print languages".
The printer supports two types of print languages: page description language and
emulation. Page description language is a language that describes images on a page basis.
Emulation is the ability of this printer to imitate print results of other printers.

Emulation Mode

When printing data written in a language other than the page description languages
supported by the printer, switch the printer to an emulation mode. The printer has multiple
emulation modes and PCL is one of them. In the PCL emulation mode, the printer emulates
the following printer.
PCL emulation mode (PCL mode)

Host Interfaces and Emulation

Each host interface supports different print languages. The following host interfaces support
PCL emulation:
• Parallel port
• LPD port
• NetWare port
• SMB port
• IPP port
• USB port
• Port9100 port
Note
• To use NetWare, SMB, or IPP port, the network expansion card (optional) must be installed.
Emulation Mode
Emulated Printer
HP-CLJ4600
1.1 About Emulation
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docuprint c3055

Table of Contents