Enabling The Panel Lock - Fuji Xerox DocuPrint CP305 d User Manual

Enabling the Panel Lock

1
Press the Menu button.
2
Select Admin Menu, and then press the
3
Select Secure Settings, and then press the
4
Select Panel Lock, and then press the
5
Select Panel Lock Set, and then press the
6
Select Enable, and then press the
7
Enter the new password, and then press the
8
Re-enter the password to confirm the password that you entered, and then press the
NOTE:
• The factory-default panel password is 0000.
• If you forget your password, turn off the printer. Then, while holding the Menu button, turn on the printer.
Continue to hold the Menu button until the display indicates to enter the new password. Enter the new
password, and then press the
will briefly indicate the password has been initialized.
• If you change the password, perform steps 1 to 2. Enter the current password, and then press the
Perform steps 3 to 4. Select Change Password, and then press the
and then press the
button.
button. Re-enter the password, and then press the
button. Perform steps 7 and 8. This will change the password.
button.
button.
button.
button.
button.
button. Enter the current password,
Using the Operator Panel Menus
button.
button. The display
button.
174