Table of Contents
Advertisement
Getting Started
Connecting to an
IBM-compatible
Laptop PC
Connecting to a
Macintosh
Desktop PC
4
English
To connect to an IBM-compatible laptop computer:
1 Set the computer display resolution to XGA (1024x768) or lower.
2 Connect the VGA/SVGA cable to the Computer In connector on the
projector and to the external monitor output connector on the laptop
computer.
Figure 4: Connecting to an IBM-compatible Laptop PC
3 Activate the VGA external monitor port on the laptop computer.
Note: For a list of laptop manufacturers and more information on the
method you use to activate the VGA external monitor port, see
"Activating the Laptop External Video Port" on page 32.
If your Macintosh desktop computer has a separate VGA output port:
1 Connect the VGA cable to the Computer In connector on the projector
and to the VGA output connector on the computer.
Computer In
connector
Figure 5: Connecting to a Macintosh Desktop PC
Computer In
connector
Monitor Out
connector
Advertisement
Table of Contents
