Table of Contents
Advertisement
Maintaining the Projector
Replacing the
Lamp Module
Cleaning the Dust
Filters
This section explains how to replace the lamp module and clean the
projector dust filters.
To replace the lamp module:
1 Press the catch on the lamp door to release the lamp door.
2 Lift out the lamp door.
3 Grasp the wire bale and remove the lamp module.
Wire bale
Figure 31: Replacing the Lamp Module
4 Insert the replacement lamp module.
5 Replace the lamp door.
6 Turn on the projector.
7 Use the Reset Lamp Timer option in the Service menu to reset the
lamp life counter.
The Polaview 330 LCD projector has two dust filters to protect the optical
components and electronics. The best procedure for cleaning the filters is
to use a vacuum cleaner from the outside of the filter covers. If the filters
need a more thorough cleaning or replacement, follow these procedures.
Maintaining the Projector
Lamp door catch
Replacement lamp module
English
37
Advertisement
Table of Contents
