Getting Started; Connecting To Power - Polaroid Polaview 330 User Manual

Getting Started

Getting Started
Connecting to
Power
2 English
This section explains how to set up and connect the projector, including
information about basic adjustments and interfacing with peripherals.
Important : To avoid damage to electronic components, first connect the
power cord to the AC socket on the projector, then connect the
plug to an AC outlet.
To connect to power:
1 Connect the power cord to the AC socket on the projector.
2 Connect the power cord plug to an AC outlet.
Figure 1: Connecting the Power Cord
The projector enters the sleep state , with the fans and lamp off. The
Power On/Standby LED, the Lamp Age LED, and the Lamp Status LED
on the projector keypad are on while the projector is in the sleep state . For
more information on the projector's operating states, see "Operating
States" on page 14.
Direction
keys
Menu
Figure 2: Projector Keypad
AC socket
Power On/Standby
LED
Lamp Status LED
Lamp Age LED
Source