Table of Contents
Advertisement
Troubleshooting
Problem
Date not appearing on
images even when
Print date is enabled.
Time zone and date
setting screen appears
when the camera is
turned on.
Camera settings reset.
Monitor turns off, and
the power-on lamp
flashes quickly.
Camera becomes hot.
Shooting
Problem
No picture taken.
Camera cannot focus.
Images are blurred.
F8
Cause/Solution
• The current shooting mode is one that does not
support Print date.
• Date cannot be imprinted on movies.
Clock battery is exhausted; all settings were
restored to their default values.
Battery temperature is high. Turn off camera and
allow battery to cool down before resuming use.
After the lamp flashes for three minutes, the
camera will turn off automatically. Pressing the
power switch also turns off the camera.
The camera may become hot when used for an
extended period of time to shoot movies or send
images using an Eye-Fi card, or when used in a hot
environment; this is not a malfunction.
Cause/Solution
• When camera is in playback mode, or setting
items or the setup menu are displayed, press the
shutter-release button.
• Battery is exhausted.
• When flash lamp flashes, flash is charging.
• The subject is too close to the camera. Try
shooting using macro mode, or Scene auto
selector or Close-up scene mode.
• The intended subject is one with which
autofocus does not perform well.
• Set AF assist in the setup menu to Auto.
• Turn camera off and then on again.
• Use flash.
• Increase the ISO sensitivity value.
• Enable vibration reduction or motion detection.
• Use BSS (Best Shot Selector).
• Use a tripod to stabilize the camera when
shooting (using the self-timer at the same time is
more effective).
A
88, E70
24, 25
23
84
A
32
22
55
41, 59
31
89, E73
23
55
39, E42
89, E71,
E72
39, 47,
E43
57
Advertisement
Table of Contents
