Table of Contents
Advertisement
General Camera Setup
The Setup Menu
Tap the d tab M Tap the z (setup) tab (A11)
The following menu options can be changed.
Option
c Welcome
screen
d Time zone and
date
e Monitor
settings
C Print date
88
Allows you to select the image displayed as the welcome
screen when the camera is turned on. Select COOLPIX to
display the COOLPIX logo. Select Select an image to use a
picture taken with the camera as the welcome screen.
Allows you to set settings related to the camera's date and
time. The Time zone setting allows you to specify the time
zone where the camera is mainly used and whether or not
daylight saving time is in effect. When the travel
destination (x) is selected, the camera automatically
calculates the time difference between the travel
destination and the home time zone (w), and saves
images using the date and time of the travel destination.
Allows you to select whether or not to display information
on the shooting screen and playback screen. If you select
Framing grid+auto info, a grid is displayed when
shooting to help you frame the shot. The default setting is
Auto info.
You can also set the image review settings and the
monitor brightness.
Allows you to imprint the shooting date and time on
images at the time of shooting. The default setting is Off.
• The date cannot be imprinted in the following
situations:
- When using Panorama assist scene mode
- When shooting movies
Description
Set up
Welcome
Time zone
screen
and date
Monitor
Print date
settings
Vibration
Motion
reduction
detection
A
E64
E65
E68
E70
Advertisement
Table of Contents
