Honda 2011 Insight Owner's Manual page 387

11. Install the new bulb in the socket
by pushing it straight in the socket
until it bottoms.
12. Reinstall the socket into the light
assembly. Turn it clockwise to
lock it in place.
13. Test the lights to make sure the
new bulb is working.
14. When reinstalling the taillight
assembly, align and pop the snap
fasteners in place. Reinstall and
tighten the two mounting bolts. 15. To reinstall the trim, set the
bottom edge of the trim in the
original position and push the
bottom half of the trim to clip it
back securely. Then push the
upper half of the trim to secure
the top clip.
16. Secure the hooks by pushing on
the areas of the trim as shown in
the illustration above.
Lights
381