Honda 2011 Insight Owner's Manual page 218

Playing the AM/FM Radio (EX model with navigation system)
The seek function
SEEK
searches up and down from the
current frequency to find a station
with a strong signal. To activate it,
press and hold the or
the TUNE bar until you hear a beep,
then release it.
The scan function samples
SCAN
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
When the system finds a strong
signal, it will stop and play that
station for about 10 seconds.
If you do nothing, the system will
then scan for the next strong station
and play it for 10 seconds. When it
plays a station you want to listen to,
press the SCAN button again.
212
Preset
store one frequency on AM and two
frequencies on FM.
side of
1. Select the desired band, AM or
FM.
2. Use the tune, seek, or scan
function to tune the radio to a
desired station.
3. Pick a preset button, and hold it
until you hear a beep.
4. Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
Each preset button can Each preset button's frequency is
shown on the bottom of the audio
display.