Changing the Oil and Filter
9.
Reinstall the engine oil fill cap.
Start the engine. The oil pressure
indicator should go out within 5
seconds. If it does not, turn off the
engine, and check your work.
10.
Let the engine run for several
minutes, then check the drain bolt
and oil filter for leaks.
366
Turn off the engine, let it sit for
11.
several minutes, then check the oil
level on the dipstick. If necessary,
add more oil.
Put the under-cover back in place
12.
and reinstall the holding clips and
screws. Lock the clips securely by
pushing on the center of each clip.
Improper disposal of engine oil can be
harmf ul to the environment. If you
change your own oil, please dispose of
the used oil properly. Put it in a sealed
container and take it to a recycling
center. Do not discard it in a trash bin
or dump it on the ground.