Setting The Clock - Honda 2011 Insight Owner's Manual

Setting the Clock

On models without navigation system
To set the time, press the CLOCK
button until you hear a beep. The
displayed time begins to blink.
Change the hours by pressing the H
(hour) button until the numbers
advance to the desired time. Change
the minutes by pressing the M
(minute) button until the numbers
advance to the desired time.
Press the CLOCK button again to
enter the set time.
You can quickly set the time to the
nearest hour. If the displayed time is
before the half hour, press and hold
the CLOCK button, then press the R
(reset) button to set the time back to
the previous hour. If the displayed
time is after the half hour, the same
procedure sets the time forward to
the beginning of the next hour.
266
Insight model
CLOCK BUTTON
(A.SEL side of the A.SEL/SCAN bar)
HOUR BUTTON
(PRESET 4)
MINUTE BUTTON
(PRESET 5)
For example: 1:06 will reset to 1:00
1:52 will reset to 2:00
When you set the time, the ignition
switch must be ACCESSORY (I) or
ON (II) position.
EX model without navigation system
and LX model
HOUR BUTTON
(PRESET 1)
RESET BUTTON
(PRESET 6)
CLOCK BUTTON
(FM/AM button)
MINUTE BUTTON
(PRESET 2)
On models with navigation system
The navigation system receives
signals from the global positioning
system (GPS), and the displayed
time is updated automatically by the
GPS. Refer to the navigation system
manual for how to adjust the time.
RESET BUTTON
(PRESET 3)