Table of Contents
Advertisement
Installing or removing the battery
one touch 900
Insert and click the battery into place, then close the telephone cover.
Unclip the cover, then remove the battery.
Charging the battery
Connect the battery charger to your phone and mains socket respectively.
•
Charging may take about 20 minutes to start if the battery is flat.
•
Be careful not to force the plug into the socket.
•
Make sure the battery is correctly inserted before connecting the
charger.
•
The mains socket must be near to the phone and easily accessible
(avoid electric extension cables).
one touch 901N
15
•
When using your telephone for the first time, charge the battery fully
(approximately 3 hours).
•
You are advised to fully charge the battery (
indicated by the depth of water on the lock
increases as the phone is charged.
To reduce power consumption and energy waste, when battery
is fully charged, disconnect your charger from the plug; switch
off Wi-Fi
, Bluetooth or background-running applications when
(1)
not in use; reduce the backlight time, etc.
1.2
Power on your phone
Hold down the
key until the telephone powers on, type in your PIN
code if necessary and then confirm with the
displayed.
If you do not know your PIN code or if you have forgotten it, contact
your network operator. Do not leave your PIN code with your telephone.
Store this information in a safe place when not in use.
If Broadcast SMS are displayed, use the
or press the
to return to the Home screen.
While the phone is searching for a network, "Searching/Emergency"
will be displayed.
1.3
Power off your phone
Hold down the
key from the Home screen.
Depending on your model.
(1)
). Charging status is
screen. The depth
key. The Home screen is
key to browse through them
16
Advertisement
Table of Contents
