Getting Started - Alcatel One Touch 990A User Manual

Alcatel mobile phone user manual

Hide thumbs Also See for One Touch 990A:

Table of Contents

Enlarged version

1.2

Getting started

1.2.1

Set-up

Removing or installing the back cover

Inserting or removing the SIM card

You must insert your SIM card to make phone calls. Please power off your

cellphone and remove battery before inserting or removing the SIM card.

Place the SIM card with the chip facing downwards and slide it into its

housing. Make sure that it is correctly inserted. To remove the card, press

and slide it out.

(1)

Check with your network operator to make sure that your SIM card is 3V or

1.8V compatible. The old 5 volt cards can no longer be used.

(1)

Installing and removing the MicroSD card

To release the microSD card holder, slide it in the direction of the

arrow and lift it. Then insert the microSD card with the golden contact

downward. Finally, turn down the microSD holder and slide it in the

opposite direction to lock it.

Installing or removing the battery

•

Insert and click the battery into place, then close the cellphone cover.

•

Unclip the cover, then remove the battery.

Table of Contents