Getting Connected; Connecting To The Internet - Alcatel One Touch 890D User Manual

Alcatel one touch 890d mobile phone user manual
Table of Contents

Advertisement

6

Getting connected

To connect to the internet with this phone, you can use GPRS/EDGE
networks or WI-FI, whichever is most convenient.
6.1

Connecting to the Internet

6.1.1
GPRS/EDGE
The first time you turn on your phone with SIM card inserted, it will
automatically configure network service: GPRS or EDGE.
To check the network connection you are using, press Menu key on
Home screen, then touch Settings\Wireless & networks\Mobile
networks\Network operators or Access Point Names. For dual
SIM model, touch either SIM1 or SIM2 on the above tabs to complete the
operation.
To create a new access point
A new GPRS/EDGE network connection can be added to your phone with
the following steps:
Press
Menu key from Home screen.
Touch
Settings\Wireless & networks\Mobile networks\Access
Point Names.
Then press
Menu key again and the touch New APN.
Enter the required APN information.
When finished, press
Menu key and touch Save.
................
67
To activate/deactivate Data roaming
When roaming, you can decide to connect/disconnect to a data service.
Press
Menu key from Home screen.
Touch
Settings\Wireless & networks\Mobile networks\Data
roaming.
For dual SIM model, touch either SIM1 or SIM2 on the above tabs to
complete the operation.
Mark/Unmark the checkbox to activate or deactivate data roaming.
When Data roaming is deactivated, you can still perform data exchange
with a Wi-Fi connection (refer to section 6.1.2 Wi-Fi).
6.1.2
Wi-Fi
Using Wi-Fi, you can connect to the Internet when your phone is within
range of a wireless network. Wi-Fi can be used on phone even without a
SIM card inserted.
To turn Wi-Fi on and connect to a wireless network
Press
Menu key from Home screen.
Touch
Settings\Wireless & networks\Wi-Fi.
Mark/Unmark the checkbox to turn on/off Wi-Fi.
Wi-Fi settings. The detailed information of detected Wi-Fi
Touch
networks is displayed in the Wi-Fi networks section.
Touch a Wi-Fi network to connect. If the network you selected is secured,
you are required to enter a password or other credentials (you may
contact network operator for details). When finished, touch Connect.
68

Advertisement

Table of Contents
loading

Table of Contents