Getting Connected; Connecting To The Internet - Alcatel 5042D Manual

Table of Contents

Advertisement

6
Getting connected ����������������
To connect to the internet with this phone, you can use GPRS/
EDGE/3G/4G networks or Wi-Fi, whichever is most convenient.
6�1

Connecting to the Internet

6�1�1
GPRS/EDGE/3G/4G
The first time you turn on your phone with your SIM card inserted, it will
automatically configure your network service: GPRS, EDGE , 3G or 4G.
To check the network connection you are using, touch the Menu key
on the Home screen, then touch Settings\More���\Mobile networks\
Access Point Names or Network operators.
To create a new access point
A new GPRS/EDGE/3G/4G network connection can be added to your
phone with the following steps:
• Touch the Menu from the Home screen.
• Touch Settings\More���\Mobile networks\Access Point Names.
• Then touch the
icon to enter the required APN information.
• When finished, touch the Menu key and touch Save.
To activate/deactivate Data roaming
When roaming, you can decide to connect/disconnect to a data service.
• Touch the Menu key from the Home screen.
• Touch Settings\More���\Mobile networks.
• Select Data roaming to set roaming mode.
69
• When Data roaming is disabled, you can still perform data exchange with
a Wi-Fi connection (refer to "6�1�2 Wi-Fi").
To set preferred network mode
• Touch the Menu key from the Home screen.
• Touch Settings\More���\Mobile networks.
6�1�2
Wi-Fi
Using Wi-Fi, you can connect to the Internet when your phone is within
range of a wireless network. Wi-Fi can be used on your phone even
without a SIM card inserted.
To turn Wi-Fi on and connect to a wireless network
• Touch the Menu key from the Home screen, then touch Settings.
• Touch the switch
beside Wi-Fi to turn on/off Wi-Fi.
• Touch Wi-Fi, the detailed information of detected Wi-Fi networks is
displayed in the Wi-Fi networks section.
• Touch a Wi-Fi network to connect to it. If the network you selected is
secured, you are required to enter a password or other credentials (you
may contact the network operator for details). When finished, touch
Connect.
To activate notification when a new network is detected
When Wi-Fi is on and the network notification is activated, the Wi-Fi icon
will appear on the status bar whenever the phone detects an available
wireless network within range. The following steps activate the notification
function when Wi-Fi is on:
• Touch the Menu key and Settings from the Home screen.
• Touch Wi-Fi, then touch the Menu key and Advanced from the Wi-Fi
screen.
• Mark/Unmark the Network notification checkbox to activate/
deactivate this function.
70

Advertisement

Table of Contents
loading

This manual is also suitable for:

Onetouch pop25042x

Table of Contents