Table of Contents
Advertisement
Changing Your Destination
There are four methods by which you
can change or add a waypoint to your
route. These are:
Find Nearest (Voice command)
From the map screen, say one of the
"Find Nearest..." voice commands to
locate the nearest gas station, ATM,
restaurant, or other point of interest. See
the "Find Nearest" voice commands
listing on page 161.
Go Home (Voice command)
From the map screen, say "Go home."
If you have entered a "Go home"
address, then the system will display a
confirmation screen.
Using Interface Dial to Change
Destination
While following a calculated route, you
can select a new destination with the
map screen and the Interface Dial.
With the map screen displayed, use the
Interface Dial to move the position
icon. It will change to crosshairs. Use the
Interface Dial to position the crosshairs
on your desired new destination, street,
or icon, then push in on the Interface
Dial. The Select a place screen or a
pop-up menu will be displayed.
NOTE:
The Select a place screen will be
displayed when the crosshairs are
positioned near multiple icons or
locations. A pop-up menu will be displayed
when the crosshairs are positioned on a
particular street, icon, or location.
If this is not your desired new
destination, press the CANCEL button
or the NAVI BACK button on the
steering wheel to return to the map
screen. Reposition the crosshairs with
the Interface Dial, then push in on the
Interface Dial again to see the new
address.
2010 RL
Driving to Your Destination
When the Select a place screen is
displayed, select an item from the list,
and the Calculate route to screen is
displayed. Then select OK and push in
on the Interface Dial. You can select
either Set as New Destination or
Set as Waypoint for your specified
position.
Navigation System
77
Advertisement
Table of Contents
