Table of Contents
Advertisement
Units (mile or km)
Allows you to select the units for the
entire system (mile or km).
Voice Recognition
Feedback
Allows you to turn voice control system
prompts ON or OFF. When OFF, you
will not hear the voice control system
confirmations or prompts.
Auto Volume for Speed
This navigation system automatically
increases the navigation volume
according to the vehicle speed. This
setting allows you to adjust the rate of
the volume increase.
When you select OFF, the volume is not
increased by the vehicle speed. The
factory default is MID.
Routing & Guidance
From the SETUP screen (Other), say
or select Routing & Guidance and
the following screen appears:
to
2010 RL
System Setup
Rerouting
If Rerouting is set to AUTOMATIC
and you deviate from the route, you will
see "Recalculating..." at the top of the
screen for several seconds as the system
calculates a new route. This is followed
by new routing instructions.
If Rerouting is set to MANUAL, you
will hear a tone when the "Off route"
message is displayed. Say "Recalculate"
or select Recalculation on the screen
to make the system recalculate your new
route.
NOTE:
• If you live in an area with poor
mapping, you may wish to set
Rerouting to MANUAL to avoid
constant recalculation. However, you
will have to manually select
Recalculation on the screen to have
the system plot a new route.
• It is strongly recommended that you
leave the system set to the factory
default (Automatic).
Navigation System 101
Advertisement
Table of Contents
