Table of Contents
Advertisement
Suppressing interference
If you cannot clear picture or sound interference despite optimisation, you can switch off the
built-in modulator.
1
Switch on the TV set. If required, select the programme number for
the video recorder.
2
Press STOP/EJECT ? to eject any cassette that might be in the
device.
3
Hold the STOP h button on the remote control.
press the STOP/EJECT ? button on the video
recorder until the pre-set modulator frequency e.g. 'M591' (591MHz
or UHF channel 36) appears in the display.
4
Select the line '
display with P ;q or P =r .
5
' on the TV screen with QSr or in the display 'MOD-'
Select '
(modulator off).
In the display, select 'MOD+' (modulator on) with
6
Confirm with OK .
7
To end, press MENU .
' on the TV screen or 'MOD+' in the
QSr
.
Hide quick links:
Advertisement
Table of Contents
