Philips VR570/58 User Manual page 30

1
0:30:
21
2
1
0:00:
02
2
3
4
5
a
b This occurs when there are no recordings on a portion of a tape.
Therefore, the video recorder cannot receive any information from the
tape. This is not a fault in your machine.
a
b If you rewind a cassette from the tape position '0:00:00', the counter will
show for instance, '-0:01:20' (the cassette will be rewound to 1 minute
and 20 seconds before '0:00:00').
a
b This counter will automatically recognise the length of the tape. In addition,
when you put in a cassette the video recorder must first calculate the time
played. Therefore, '-:--' appears first and only after the tape has been
running for a few seconds will the correct playing time be shown.
While a cassette is playing, press H (reverse) or I (forward) one
or more times. This will, for example, appear in the display:
To stop at a certain place on the tape, press PLAY G .
Scanning interferes with the picture quality. The sound is switched off. This is
not a fault in your machine.
During playback, press STILL R to stop the tape and display a still
picture. This will, for example, appear in the display:
Each time you press STILL R , the picture will advance one frame.
When you hold down the STILL R button, the tape will be played
in slow motion.
When you press I several times, you have a choice of several
playback speeds for slow motion.
To continue playback, press PLAY G .
-0:01:20
Playback