Table of Contents
Advertisement
TV01
Installing your video recorder
When the automatic channel search function is activated, the TV channels are saved in a specific
order. This may vary from the order of TV channels on the TV set.
This function changes the order of TV channels saved in the video recorder to match that of the
TV set.
This only works if the video recorder (socket EXT.1 AV. 1 ) and the TV set
.
1
Switch on the TV set. If required, select the programme number for
the video recorder.
2
Press the MENU button on the remote control. The main menu will
appear.
3
Select line '
OK .
4
Press the OK button. 'TV01' will appear in the video recorder display.
5
Select programme number '1'
a
b If you have connected additional devices to socket
disconnect these devices. Because of other connected devices, the TV set
could switch to the programme number of the scart socket.
6
Confirm with OK on the video recorder remote control. The video
recorder compares the TV channels on the TV set and the video
recorder.
If the video recorder finds the same TV channel as on the TV set,
then it stores it at 'P01'.
' using P =r or P ;q and confirm with
.
EXT.2 AV. 2
, please
Hide quick links:
Advertisement
Table of Contents
