Special Installation Functions; Automatic Tv Channel Allocation (Follow Tv); Automatic Tv Channel Search (Autoinstall) - Philips VR605/02 User Manual

Special installation functions

You can select one of the following installation functions in
order to adapt the video recorder to your own specific
requirements.
Automatic TV channel allocation (Follow
TV)
With this function, the video recorder stores the channels in
the same order as on the TV set. This only works if the video
recorder (socket ) and the TV set are connected with a
EXT.1
scart cable. You must switch off any equipment connected to
socket .
EXT.2
a
Switch on the TV set. If required, select the programme
number for the video recorder.
b
Press the button on the remote control. The main
MENU
menu will appear.
CLOCK
OSD
CHANNEL ALLOCATION
CHANNEL/FREQUENCY
MANUAL SEARCH
AUTOINSTALL
FOLLOW TV
DIRECT RECORD
COUNTER
------------------------
-/+
c
Select the line 'FOLLOW TV' with the
button.
d
Press the button. 'TV01' will appear on the video
OK
recorder display.
e
Select programme number '1' on the TV set.
f
Confirm with the
OK
recorder-remote control. The video recorder compares
the TV channels on the TV set and the video recorder.
If the video recorder found the same TV channel as the
TV set, then it stores it at 'P01'.
D When 'NOTV' (no signal from TV set) appears in the
display, the TV channels can not be allocated
automatically. In this case, read 'Manual TV channel
allocation'.
g
Wait until, for example, 'TV02' appears.
8
OK
P r or
TV01
button on the video
h
Select the next programme number, for example, '2' on
the TV set.
i
Confirm with the
recorder-remote control.
D If you allocated the wrong TV channeL, you can go
back one step with the
j
Repeat steps
allocated.
k
To end, press the

Automatic TV channel search (Autoinstall)

The video recorder will search for all TV channels. It stores TV
channels found in the following sequence: BBC 1, BBC 2, ITV,
CH 4, CH 5, SKY, others.
D If you want to start the automatic TV channel search
again, then follow the instructions below.
a
Switch on the TV set. If required, select the programme
number for the video recorder.
b
Press the
menu will appear.
c
Select the line 'AUTOINSTALL' with the
P q button.
P q
d
Press the
starts.
Wait until all TV channels have been found. This can take
several minutes.
e
When Autoinstall is complete, 'READY' will appear on the
display.
The time and date information have been set.
How to search for a TV channel manually, you can read in the
section 'Manual TV channel search'.
button on the video
OK
CLEAR (CL)
g i
to until all TV channels have been
button.
STANDBY m
button on the remote control. The main
MENU
button. The 'Automatic TV channel search'
OK
AUTOINSTALL 00
button.
P r or