Special Installation Functions; Automatic Tv Channel Allocation (Follow Tv) - Philips VR700/02 User Manual

Special installation functions

You can select one of the following installation functions in
order to adapt the video recorder to your own specific
requirements.
Automatic TV Channel Allocation
(FOLLOW TV)
With this function the video recorder maintains the same
channel sequence as on the TV set, in case you connected
your videorecorder to a TV set without scart cable. This only
functions if the video recorder (socket
set are connected with a scart cable.
D Additional equipment connected to socket
must be switched off.
EXT.2 AV 2
D With 'Connecting with scart cable and 'Easy
Link/NexTView', this function will start the data
transfer.
a
Switch on the TV set. If required, select the programme
number for the video recorder.
b
Press the button. The main menu appears.
MENU
c
Select the line 'INSTALLATION' with the
;P button and confirm with the
MAIN MENU
INSTALLATION
AUTOINSTALL
FOLLOW TV
MANUAL SEARCH
TV CHANNEL ALLOCATION
OPTIMIZE MODULATOR
TIME/DATE
Select the line 'FOLLOW TV' with the
d
button and confirm with the
the message on the TV screen.
) and the TV
EXT.1 AV 1
or
P =
P button.
TO EXIT
PRESS MENU
or
P = ;P
button. Take notice of
P
e
Press the button. 'TV01' appears in the video
OK
recorder display.
f
Select programme number '1' on the TV set.
g
Confirm with the button on the video
OK
recorder-remote control. The video recorder compares
the TV channels on the TV set and the video recorder.
If the video recorder found the same TV channel as the
TV set, then it stores it at 'P01'.
D When 'NOTV' (no signal from TV set) appears in the
display, the TV channels can not be allocated
automatically. In this case, read paragraph: 'Manual
TV channel allocation'.
h
Wait until e.g.: 'TV02' appears.
i
Select the next programme number, e.g.: '2' on the TV set.
j
Confirm with the button on the video
OK
recorder-remote control.
D If you have allocated the wrong TV channeL, you
can go back one step with the
k h j
Repeat steps to
allocated.
l
To end, press the
MENU
TV01
button.
Q
until all TV channels have been
button.
9