Selecting The Sound Track; Using Your Video Recorder Remote Control With Your Tv Set - Philips VR605/02 User Manual

Selecting the sound track

You can select the sound track you want to record. This is
especially useful if the programme is multilingual.
a
Press the button. The current setting will appear
SELECT
on the TV screen.
b
By pressing the
SELECT
select from the four possibilities displayed ('STEREO',
'RIGHT', 'LEFT', 'MONO').
D While a tape is playing, you can select a fifth
possibility: the 'MIXED' mode. In this mode you can
play the mono sound of the normal (linear) audio
track together with the sound of the stereo audio
track. You can play casettes that have been dubbed
on another video recorder.
D If there is no stereo sound recorded on the cassette,
the video recorder will automatically switch to mono
sound.
button several times you can
Using your video recorder remote control
with your TV set
Your video recorder remote control can transmit several
commands to TV sets of different makes.
By using the TV buttons on the panel in the middle of the
control, you can:
Sq
Sr
TV y
TV m
TV q
TV r
a
Hold the TV m button and enter the correct remote
control command with the digit buttons
You will find a list of all available remote control
commands on the last page of this manual.
D If the selected code does not work with your TV set,
or if the make of your TV is not in the list, you can try
out the codes one after the other.
increase the TV volume
reduce the TV volume
switch off sound
switch off the TV set
next programme number
previous programme number
.
0-9
23