Philips VR605/02 User Manual page 22

Programming a recording
(without 'VIDEO Plus+')
a
Switch on the TV set and select the programme number
for the video recorder.
b
Press the button on the remote control twice .
TIMER
c
Select a free TIMER block with the
Press the button.
TIMER
DATE PROG START V/P END
01 01
------------------------
gTIMER CLEAR
NEXT
-/+ 0-9
d
With the , C
TIMER
'DATE' (date), 'PROG' (programme number), 'START'
(start time) and 'END' (end time).
Enter or change your information with the
P r button, or with the number buttons
D Under 'DATE', use the
or weekly programming.
'D': Recording from Monday to Friday.
'W': Recordings every week on the same day.
D Under 'START', use the
'VPS or PDC' on or off.
e
Confirm with the button when the information is
OK
correct.
D The programming information has been stored in a
TIMER block.
f
Make sure that the cassette you have put in can be
recorded on.
D Use the
button to select the recording speed
SP/LP
'SP' or 'LP'.
g
Switch off with the STANDBY m
The programmed recording will only function when the
video recorder is switched off with the
button.
D If any of the TIMER blocks are in use, '
on the video recorder display.
or button.
P q P r
20:00 21:30
gCL
D/WgSELECT OK
or D button you can select
or
P q
.
0-9
button to select daily
SELECT
button to switch
SELECT
button.
STANDBY m
k ' will light up
D While a programmed recording is being made, you
cannot operate your video recorder manually. If you
want to cancel the programmed recording, press the
button.
STANDBY m
D If the video recorder is switched on a few minutes
before a programmed recording is supposed to
begin, 'TIMER RECORD' will flash on the TV
screen.
D If you reach the end of the cassette during a
recording, the video recorder will automatically
eject the cassette.
D If you forget to load a cassette, 'NO CASSETTE'
will appear on the TV screen and '
video recorder display.
D If you have put in a cassette which cannot be used
for recording, the video recorder will automatically
eject it.
D If 'TIMER FULL' appears on the TV screen when
you press the button, you have used up all
TIMER
the available TIMER blocks. If you want to clear or
check a programmed recording (TIMER block),
select it with the P q or
D Programme numbers 'E1' and 'E2' are for
recordings from other sources (through scart socket
or ).
EXT.1 EXT.2
k ' will flash on the
P r button.
19