Reducing Picture Disturbance ('Optimizing The Modulator'); Switching Off The Modulator - Philips VR700/02 User Manual

Reducing picture disturbance
('optimizing the modulator')
You may experience picture disturbance if you have not used
a scart cable to connect your video recorder and TV. This is
because another TV station in your reception area may
already be using UHF-channel CH35 or 583MHz.
a
Make sure that there is no cassette in the video recorder.
On the video recorder, at the same time hold the
and the button for a few seconds until
EJECT J P =
e.g.: 'CH35' or '583' appears in the display. The video
recorder will transmit a test picture on UHF-channel 35(or
frequency 583Mhz).
INSTALLATION
OPTIMIZE MODULATOR
OPTIMIZE
MODULATOR
CHANNEL/FREQ.
________________________________
b
In line 'CHANNEL/FREQ.' select the indication for
channel 'CH' or frequency 'FREQ.', using the
button.
Q
c
Select the line 'OPTIMIZE' with the
button. Press the button.
P
d
When the video recorder finds a 'free' TV channel, the
channel or frequency will be indicated.
D You can also enter the channel or frequency directly
with the digit buttons
e
Tune in the TV set in this channel or frequency.
f
Confirm the channel or frequency indicated with the
button.
OK
g
To end, press the
MENU
28
CH35
ON
CH
TO STORE
PRESS OK
or
P
or
;P P =
.
0-9
button.

Switching off the modulator

If you cannot clear picture or sound interference, you can
switch off the built-in modulator. You should only do this if you
have connected the video recorder to the TV set with a scart
cable.
D With the function 'Easy Link/NexTView' the
modulator will be switched off automatically.
a
Switch on the TV set and select the programme number
for the video recorder.
b
Make sure that no cassette is in the video recorder. On
the video recorder, press the
at the same time for several seconds, until, for example,
'CH35' or '583' appears on the video recorder display.
c
Select the line 'MODULATOR' on the TV screen or 'M ON'
in the display with the
d
With the or button, select the function 'OFF' on
Q P
the TV screen or 'MOFF' (modulator off) in the display.
Select 'ON' on the TV screen or 'M ON' (modulator on) in
the display to switch the modulator back on.
e
Confirm with the button.
OK
f
To end, press the
MENU
and button
EJECT J P =
or button.
;P P =
button.