Table of Contents
Advertisement
QUICK REFERENCE GUIDE:
Arming
Press
of your transmitter for one second. When the system arms, you
will hear a short chirp, and the parking lights will flash once. If the vehi-
cle's power door locks are controlled by the system, the doors will lock.
Arming While Driving
Press
on your transmitter while the vehicle is running. The system will
chirp once and then once more to indicate that the ignition is on.
Disarming
Press
. You will hear two chirps, and the parking lights will flash twice.
If power locks are controlled by the system, the doors will unlock.
Disarming Without a Transmitter
Turn on the ignition. Press the Valet switch within 15 seconds. The sys-
tem should now disarm. If it does not, you may have waited too long; turn
the ignition off and on and try again.
Silent Mode
™
Press
briefly before arming or disarming, and the confirmation
chirp(s) will be eliminated for that one operation only.
Panic Mode
Press
for 1.5 seconds, and you will enter Panic Mode. The siren will
sound and the parking lights will flash for 30 seconds.
To enter or exit Valet
Turn ignition to "run" position, then turn to "off" position. Press and
release the Valet switch within 10 seconds. The Status LED will light
steady if you have entered Valet Mode, and it will go out if you exited
Valet Mode.
Using Remote Valet
Open any door. Press
light steady if you have entered Valet Mode, and it will go out if you exit-
ed Valet Mode.
1999 Directed Electronics, Inc.
©
®
Mode with the Valet switch
®
as you enter or exit the vehicle:
. Press
. Press
again. The Status LED will
21
Advertisement
Table of Contents
