Texas Instruments TI InterActive! Getting Started Manual page 35

Plotting the glide
performance
6. Click the List Editor's Close button
into the document.
L1
30
40
50
60
70
1. With the cursor positioned at the end of the list, press Enter
to create a new line.
2. On the TI InterActive! toolbar, locate the Graph button
click the down arrow
displayed, representing the available graph types.
3. Click the Scatter Plot button
displayed along with a Graph window.
4. Make sure that the Stat Plots tab is selected.
5. In the uppermost text box, type L1 to specify it as the list
containing the x coordinates.
6. Press the Tab key to move to the second text box, and type L2 to
specify it as the list containing the y coordinates.
7. If it is not already checked, click the check box at the left to
select this plot. TI InterActive! plots the data points in the
Graph window. The points are not visible because they are
outside the default viewing boundaries of the Graph window.
L2
600
550
700
875
1050
next to it. A group of buttons is
. The Functions editor is
Getting Started with TI InterActive!
. The list is inserted
and
35